Managing secure entry…
The Netgenium ICP0210-IP Intercom is a native IP device, providing
dynamic communication between a door entry point and one or
more telephone handsets or PCs on the network.
Control doors remotely from the telephone handset using DTMF,
soft buttons or speed dials.
The unit supports SIP registration and peer to peer operation as
well as Cisco SCCP call control protocol. Once registered with
your telephone system, the intercom can be allocated an
extension number and can make and accept calls.
The call button can be configured using a browser with a target
number to dial when it’s pressed.
More on our ICP Intercom Panels:
Features a high-quality stainless steel brushed plate.
DDI compliant call buttons
Speaker and microphone
External Trigger (NC/NO ‘no-volt’ contacts)
IP Telephony integration
DTMF support for door control (SIP & SCCP)
Meets PoE standards
Our Intercom Panel meets International Power over Ethernet (PoE) standard 802.3af.
ICP0210-IP Single Button Intercom Panel
ICP0220-IP 2 Button Intercom Panel
ICP0230-IP 3 Button Intercom Panel
ICP0240-IP 4 Button Intercom Panel
1 No. 10/100 Base TX Ethernet RJ45
Cisco Call Manager Skinny
SIP 2.0 (Peer and Proxy)
G711 uLaw ,G711 ALaw, PCM, Wav 11.025 Khz, Wav 22.05 Khz, Wav 44.1 Khz, Wav 48 Khz
No 2 NO or NC contacts
No 2 Digital Inputs
Power over Ethernet IEEE802.3af
H x W x D (mm) 215 x 130 x 35
Environment Temperature -5º C to +40º C
Humidity 0-95% rh non-condensing