Meet the AIL3022-IP
The AIL3022-IP is a network-ready audio frequency induction loop. The unit is powered from PoE+ and provides the ability to deliver high quality sound directly to hearing aids carrying NHS or similar approval or complying with IEC 118-1.
Designed to complement the existing Netgenium IP speaker product range for use in car parks, help points, speech security barriers, informatin points and interactive exhibits.
The AIL3022-IP can also help with compliance to the Disabled Discrimination Act (DDA).
See below for the headline features of the AIL3022-IP Audio Induction Loop:
Configuration through web browser
It’s straightforward to use with single cable deployment and on-board flash storage. Use the ‘Line Out’ output to connect to a PA amplifier.
Native IP AFILS Induction Loop
The AUG3201-IP supports up to nine levels of priority for audio announcements for selective muting.
Low-cost single cable deployment (CAT5e or CAT6)
The AUG3201-IP features four flex inputs and four flex outputs. Each Flex I/O is configurable through the web browser interface, providing flexible configuration options for the attached I/O.
Netgenium’s PolicyServer provides automated announcements along with seamless integration with Cisco Skinny and SIP IP Telephony and Milestone Xprotect Smart Client.
1 No. 10/100 Base TX Ethernet RJ45
80Hz – 5kHz at low level, measured as a loop current with no metal loss correction
Metal Loss Correction
0db – 3db / Octave Boost
G711 uLaw, G711 ALaw, PCM
Wav 11.025 Khz, Wav 22.05 Khz, Wav 44.1 Khz, Wav 48 Khz
No 4 Flex Inputs (Requires Digital 0v contact)
No 4 Flex Outputs (12V switched –ve)
Flex I/O can be used for local announcements, IP events and PolicyServer control
Power over Ethernet IEEE802.3at
1RU Rack Mountable 330mm depth
Environment Temperature -5º C to +40º C
Humidity 0-95% rh non-condensing